Guide For Rubber Roof Installation
From this article you will learn step by step guide process of rubber roof installation for those who want to do roof installation themselves rather than pay the services of a professional roofer.
What You Will Need For Rubber Roof Installation
Here are the things you must prepare. The list of items required for rubber roof installation is a fairly short one. Apart from the roofing material itself, all you will need is a utility knife or scissors, bonding adhesive, a paint roller to apply the adhesive and a broom to sweep away any debris. For the safety caution, it is advisable for you to wear gloves to protect your hands and some form of eye protection. If you are installing a rubber roof over top of an existing roof, you will also need some kind of plywood base board to lay underneath the rubber. In order to bond properly with the rubber membrane, the base board should be sanded, thoroughly cleaned and completely dry. If you plan to attach the rubber to vertical surfaces such as walls, you may need some metal strips to affix the rubber properly. You can buy inexpensive aluminum termination bars especially for this purpose.
The Rubber Roof Installation Step By Step
Now, If you are installing black rubber roofing the best thing to do so on a cool, dry day with a fair amount of cloud cover. The whether should be not too cool, though, since latex bonding adhesive requires an ambient air temperature of at least 50 degrees Fahrenheit, or 10 degrees Celsius, for a period of 48 hours after application. One needs to get the temperature just right, because on a bright, sunny day, the rubber roofing membrane can become hot very quickly due to the black rubber absorbing the heat from the sun’s rays. Also, since the rubber is very heavy, it is advisable to have at least one other person to help you with it.
What you need to know about rubber roofing material is, it’s comes in rolls forms up to 50 feet wide and 100 feet long, so the amount of cutting and shaping that you will need to do is fairly minimal, especially when compared to tile roofing. With this size, it shouldn’t be any problem and possible to cover most roofs seamlessly.
Now you can start the installation of your rubber roof. First, start by sweeping the roof thoroughly to take away any dirt or debris. Make sure the roof is clean enough and once the roof is clean, you can begin applying the latex bonding adhesive with the paint roller. Make sure that the adhesive is applied evenly, to prevent air bubbles in the rubber, and be careful not to paint yourself into a corner. Lay down the rubber roofing and then sweep it again with the broom to make sure that it lies flat against the surface and that there are no wrinkles. You have to wait for half an hour for the adhesive to bond and then repeat the sweeping, from the center outwards. Next, use the scissors or utility knife to trim any unwanted rubber from above the termination bars, if applicable, and apply latex tape over any seams that may exist. Your rubber roof installation should now be complete for a typical flat roof. If you found that your roof is a complicated roof, for example one that is an odd shape or has pipes and other fixtures that you need to work around, may require more specialist advice. The home improvement stores should be able to give an opinion for you on any special equipment that you may need, or whatever else you need to take into consideration when dealing with some problems that may occur during the rubber roof installation.
Guide For Rubber Roof Installation
Technorati Tags: rubber roof, rubber roofing, rubber roof installation
Tags: rubber roof installation, rubber roof installation guide, rubber roof installation step by step, rubber roofing installation